PM100  Super Clear Epoxy Flooring

Product Description

PolyMax 100 is comprised of a water white clear, moisture insensitive, multipurpose epoxy and various aggregates.  Designed to be extremely versatile, it can be used in troweled epoxy mortars, self-leveling and broadcast flooring systems.  This specially formulated epoxy has very good chemical resistance, excellent abrasion and impact resistance and excellent color stability.

A variety of hardeners allows PM-100 to be installed under most environmental conditions.  Fast cure hardeners return the floor to service in under 24 hours.  Slower cure hardeners are used  in high temperature applications.  All hardeners are an easy to measure 2 to 1 mix ratio and each is suitable for priming, body coat and or as a finish coat.

Typical Use

Universal PM-100 is designed to be used as a primer, a mortar, a broadcast binder and as a grout or top coat in heavy duty, industrial and commercial applications.  It is also commonly used in food processing and preparation facilities.  Being “water white clear”, PM-100 is also ideal for decorative, architectural applications.

PM200  Heavy Duty Epoxy Coating

Product Description

PolyMax 200 Epoxy Coating is a durable pigmented, high build, very low VOC, multi-purpose two component, epoxy coating.  It is not a floor paint.  Used primarily in industrial and commercial applications, it can be applied with a glass smooth, high gloss finish or it can be combined with various aggregates to obtain virtually any level of slip resistance required.

This specially formulated epoxy has very good chemical, abrasion and impact resistance and excellent color stability. When properly installed, this 8 to 12 mil finish will out last normal floor paints by at least 5 times.

Typical Use

Versatile PM-200 can be used as a heavy duty epoxy floor coating over concrete or steel, a finish coat for an epoxy mortar or broadcast overlay, or a primer/color coat for PolyMax specialty urethane finishes.

PM-200 epoxy coating is commonly installed in food processing areas, commercial kitchens, warehouses, hospitals, schools, laboratories, printing plants and mechanical shops.

Use PM-200 anywhere a good quality, chemical and abrasion resistant finish is required.

PM-300   Heavy Duty Epoxy Coating

Product Description

PolyMax 300 Heavy Duty Epoxy Coating is a cycloaliphatic amine cured, pigmented high build epoxy, designed to be used where extra chemical, impact and abrasion resistance is required.  Used primarily in heavy industrial and commercial applications, it can be applied with a glass smooth, high gloss finish or it can be combined with various aggregates to obtain virtually any level of slip resistance required.

This specially formulated epoxy exhibits excellent chemical, abrasion and impact resistance and excellent color retention. When properly installed at 8 to 16 mils, it will out wear normal floor paints up to 10 times.

Typical Use

Versatile PM-300 can be used as a heavy duty epoxy floor coating over concrete or steel, a finish coat for an epoxy mortar or broadcast overlay, or a primer/color coat for PolyMax Specialty Urethane finishes.

PM-300 epoxy coating is commonly installed in chemical processing areas, high traffic warehouses, loading docks, chemical laboratories, printing plants and machine shops.

Use PM-300 anywhere a top quality, chemical and abrasion resistant finish is required.

PM-500   Chemical Resistant Urethane

Product Description

PolyMax 500 Series Chemical Resistant Urethane Coating is a fully pigmented, aliphatic, high build urethane, designed to be used where chemical, impact and abrasion resistance is paramount. It is virtually impervious to ultra violet attack and most common chemicals, including skydrol and brake fluid.  The 500 Series urethane maintains its gloss level far longer than conventional coatings.

Varying levels of skid resistance can be obtained by adding slip resistant aggregate to the finish.  When properly installed at 8 to 16 mils, it can out wear normal floor paints 10 times or more.

Typical Use

Versatile PM-500 is typically used as a heavy duty floor coating over concrete or as a gloss retentive finish coat for an epoxy mortar or broadcast floor.

Install PM-500 in automotive repair shops, aircraft hangars, chemical processing areas, high traffic warehouses, loading docks, or as an extra durable finish on PolyMax seamless floors in commercial kitchens, customer waiting rooms lockers or showers.

PM-CNS     Skid Resistant Epoxy Flooring

Product Description

PolyMax CNS is a very durable and skid resistant, industrial epoxy flooring system comprised of moisture tolerant epoxy and various selected aggregates. Designed to be extremely versatile, the surface finish can be used virtually anywhere an aggressive skid resistant finish is required. Surface textures can be varied from very aggressive to a sand paper finish. The system’s specially formulated epoxy has good chemical resistance, excellent abrasion and impact resistance and good color stability. Quick curing rates allow PM-CNS to be installed under most environmental conditions to return the floor to service within 24 hours.

Typical Use

PM-CNS is designed to withstand the rigors of heavy industrial traffic.  Its epoxy matrix and specialized aggregates protect employees and equipment, such as fork lifts, from injury and damage caused by slippery or wet floors.  Its most common usage is on ramps, loading docks and stairs in food packing plants, wet process and chemical handling areas where slip resistance is paramount, but it can be used anywhere the ultimate is skid resistance is needed.

PM-CRC   Heavy Duty Seamless Surfacing System

Product Description

PolyMax-CRC is a unique combination of compatible liquid applied polymers designed to form a seamless floor, wall and ceiling envelope. Integrated junctions and now visible joints, affords the customer the ultimate cleanability and resistance to microbial growth.

PolyMax CRC-R is a fiberglass reinforced pigmented epoxy system recommended for use over dry wall or wherever extra puncture protection is needed.

PolyMax CRC-UR is a fiberglass reinforced system finished with UV stable chemical resistant urethane.

PolyMax CRC-NR is a non-reinforced pigmented epoxy system which is most commonly used over hard substrates such as concrete or cement board.

Typical Uses

PolyMax-CRC systems are most commonly used in clean rooms, surgical suites, laboratories, shower enclosures, animal colonies and special food processing areas. These systems are designed to withstand the rigors of heavy industrial use and maintain their inherent superior aesthetic.

PM-DBS   Decorative Seamless Flooring

Product Description

Economical PolyMax DBS is a very durable and decorative epoxy flooring system comprised of a water white clear, moisture tolerant, multi-purpose epoxy and various quartz aggregates. Designed to be extremely versatile, the surface finish can range from very aggressive and slip resistant, to nearly glass smooth.  This top quality epoxy formulation exhibits very good chemical resistance, excellent abrasion and impact resistance and superior color stability.

Adjustable curing rates allow PM-DBS to be installed under most environmental conditions.  Fast cure hardeners can return the floor to service in under 24 hours. It is the perfect choice when economy, durability and aesthetics are desired.

Typical Use

Use PM-DBS in virtually any commercial and institutional applications and many industrial areas where a decorative, slip resistant, seamless floor is needed.  It will withstand the rigors of all but the heaviest industrial traffic and chemical exposure.  It is commonly found in automotive show rooms, food service areas, surgical prep areas, laboratories, rest rooms, correctional facilities, wet process areas, and showers and locker areas.

PM-HDM   Heavy Duty Epoxy Flooring

Product Description

PolyMax Heavy Duty Mortar is troweled industrial epoxy flooring system that is particularly well suited for renovation of severely damaged old concrete. It is easily cleaned and virtually eliminates surface chips, cracks and rough control joints which can result in employee injuries, high forklift maintenance and increased general maintenance costs. Use on new floors to prevent costly damage from impact and wear for the normal life of the floor.

Surface finish can range from very aggressive to nearly glass smooth to enhance cleanability.  Its specially formulated epoxy has very good chemical resistance, excellent abrasion and superior impact resistance and color stability.

Typical Use

PM-HDM is designed to withstand the rigors of heavy industrial use.  Its specially graded aggregates and heavy duty epoxy protect concrete floors from typical industrial damage by harsh chemicals, impact and abrasion.  Its most common usage is in automotive manufacturing, machine shops, bottling plants, food packing plants, wet process and chemical handling areas.

PM-HDM-d   Heavy Duty Epoxy Flooring

Product Description

PolyMax HDM-d is a decorative industrial troweled epoxy mortar flooring system that is particularly well suited for renovation of severely damaged old concrete or for use in high traffic areas in new construction.  Once installed, it levels floors and eliminates all surface chips, cracks and rough control joints which can result in injuries due to falls and increased general maintenance costs.

Surface finish can range from slip resistant to nearly glass smooth to further enhance cleanability. Its specially formulated epoxy has very good resistance to most chemicals, excellent abrasion and superior impact resistance and color stability.

Typical Use

PM-HDM-d is designed to withstand the rigors of heavy industrial use but it is most commonly used in laboratories, surgical suites, auto dealership show rooms and lobbies. Beautifully colored aggregates in an unlimited variety of color combinations and heavy duty crystal clear epoxy protect concrete floors and add warmth and beauty for decades.

PM-NGT   Decorative Heavy Duty Flooring

Product Description

PolyMax NGT (No Gind Terrazzo) Epoxy flooring is a troweled industrial grade epoxy flooring system with a decorative terrazzo appearance. It is particularly well suited for renovation of old damaged concrete floors. Used on new floors, it will help prevent costly damage from impact and wear while dramatically improving esthetics.  Surface texture can range from glass smooth to very aggressive and slip resistant to reduce employee slip fall injuries.

This specially formulated epoxy has very good chemical and heat resistance, excellent abrasion and impact resistance with superior color stability.

Typical Use

PM-NGT is designed to withstand the rigors of moderate industrial use while adding the beauty of a multi-colored natural marble to any floor. It is most often used in schools, high capacity commercial and institutional lobbies, public areas in airports, surgical suites, showers and drying areas, automotive show rooms and customer waiting areas.  The specially graded aggregates and heavy duty epoxy protect concrete floors from typical damage by harsh chemicals, impact and abrasion.

PM-SLB    Industrial Grade Epoxy Flooring

Product Description

PolyMax SLB is a very durable, slip resistant, industrial epoxy flooring system comprised of a tinted, moisture tolerant, multi-purpose epoxy and various aggregates. Designed to be extremely versatile, the surface finish can range from very aggressive to nearly glass smooth.  The system’s specially formulated epoxy has very good chemical resistance, excellent abrasion and impact resistance and superior color stability.

Adjustable curing rates allow PM-SLB installed under most environmental conditions.  Fast cure hardeners return the floor to service within 24 hours.

Typical Use

PM-SLB is designed to withstand the rigors of moderate industrial traffic. Its epoxy rich matrix and special aggregate protect concrete floors from damage by harsh chemicals, impact and abrasion. Its most common usage is in food packing plants, wet process and chemical handling area where slip resistance is paramount. It is also frequently used in test laboratories, rest rooms, showers, and locker areas.

Tech-SL  Self Leveling Epoxy Flooring

Product Description

PolyMax Tech-SL is a very durable, “self leveling” type, epoxy flooring system comprised of a tinted, moisture tolerant, multi-purpose epoxy with special fillers and aggregates.  This highly flowable epoxy rich system provides an extremely dense, smooth, level floor finish which provides the ultimate in cleanliness and sanitation.  It has very good chemical resistance, superior resistance to wear from abrasion and excellent impact resistance.

Typical Use

Tech-SL is specially designed to be used where a very smooth, seamless, sanitary floor finish is required. Far more durable than a floor paint or coating, it will withstand the rigors of moderate industrial traffic and heavy foot traffic.  Its epoxy rich matrix and special fillers and aggregate allow it to be virtually self-leveling for an nearly glass smooth floor finish.

It is ideally suited for use in areas such as TV production stages, clean rooms, biological laboratories, surgical areas and treatment rooms, animal labs and specialized chemical process recovery areas, dust free component manufacturing and micro component manufacturing.

PM-5000 AC    Aircraft Hangar Coating System

Product Description

PolyMax 5000 Aircraft Hanger Floor Coating System is comprised of a Unique Penetrating Polymer Primer, an Epoxy Binder Coat and a Special UV/Chemical Resistant Urethane Finish.  Both the epoxy and urethane are fully pigmented, high build coatings designed to be used where chemical, impact and abrasion resistance is paramount.  The Chemical Resistant Urethane finish is impervious to ultra violet attack and most common chemicals, including skydrol jet fuel and brake fluid.  The 5000 Series Urethane maintains its gloss and color far longer than conventional coatings.

Although inherently slip resistant, varying levels of additional skid resistance can be obtained by adding aggregate to the intermediate coat.  When properly installed at 20-24 mils, it will outperform normal floor paints 10 times or more.

Typical Use

Versatile PM-5000 AC is typically used as an air craft hanger coating, but it is also ideal for automotive repair shops, chemical processing areas, high traffic warehouses, loading docks, or any heavy duty industrial use where the substrate is sound and smooth.

Its light reflective finish can substantially reduce lighting and maintenance costs, so PM-5000 AC is also ideal for most commercial, institutional or industrial applications where a monochromatic finish with superior durability is required.

PM-400   Breathable Floor Coating

Product Description

PM-400 is a new generation, zero VOC, epoxy coating, which exhibits exceptional properties previously unavailable with waterborne products.  PM-400 meets the performance standards, including chemical, abrasion and impact resistance of traditional heavy-duty industrial epoxy floor coatings.

PM-400 will perform in areas where heavy-duty industrial floor coating could not previously be used. Extremely low odor, PM-400 can usually be installed during work hours. It can be installed over damp concrete or over porous concrete.  PM-400 virtually eliminates pinholes caused by concrete gassing.  It is highly resistant to hydrostatic delamination. PM-400 has lustrous finish but more slip resistant than high gloss finishes.

Typical Use

Use PM-400 Epoxy Coating wherever a durable, easy to clean, chemical and abrasion resistant floor finish is required.  Due to it’s unique formulation, it is particularly well suited for floors in wet areas as well as on grade or below grade floors where moisture vapor emission is less than 10 lbs./1000 square feet per 24 hours. Coating should not exceed 20 wet mils in two coats in these areas.

Choose PM-400 Epoxy coating to reduce maintenance costs, dust proof and brighten warehouses, manufacturing areas, machine shops, automotive repair facilities, locker rooms and showers.  It provides excellent protection for concrete floors in breweries where the floors are continuously damp or wet.

PM DCS   Decorative Chip System

Product Description

PolyMax DCS is a medium duty industrial or heavy duty commercial grade, decorative seamless flooring system.  It is comprised of a durable fluid applied, pigmented, high build epoxy coating with decorative plastic chips embedded in ultra-clear, high durability epoxy or urethane.  This decorative floor system will withstand the rigors of medium duty industrial and commercial applications. Surface finish can be slightly textured or glass smooth.

This specially formulated epoxy has very good chemical, excellent abrasion and impact resistance and good color stability.  Three times stronger than concrete, this beautiful easily maintained floor will last two to three times longer than premium vinyl tile or sheet vinyl.

Typical Use

The versatile PM DCS flooring system is most often used in schools, community centers, fire houses, locker rooms and restrooms, and retail stores. But it is ideal for any area where a low maintenance, decorative, economical floor is required.

Use PM DCS anywhere a decorative, low maintenance, seamless floor that is an alternative to vinyl tile is desired.

PM-180 Elastomeric Epoxy

Product Description

PolyMax 180 Elastomeric Epoxy is a new generation of molecularly designed flexible epoxies.  Unlike past formulations, PM-180 will not become brittle with age. Its high tensile strength and superior elongation capabilities make it the ideal product as a stand alone coating, crack filler or as an intermediate to reduce reflective cracking in rigid overlays from substrate movement.

It is available in clear and in colors.  It is a 100% solids, zero VOC, multipurpose two component, epoxy with an easy to use one to one mix ratio.  It can be applied with a glass smooth, high gloss finish as a membrane coating or it can be combined with various aggregates to obtain virtually any level of slip resistance required. This specially formulated epoxy has good chemical, excellent abrasion and impact resistance and good color stability.

Typical Use

Versatile PM-180 is most often used as a mechanical room floor coating/membrane, as a high strength joint filler, a pick resistant caulk in correctional facilities and as a reflective crack damper under more rigid overlays.